ABB CRB 15000 Скачать руководство пользователя страница 208

Страница: 208 / 1096

Note

Action

xx2100000415

Loosen the robot from the foundation.

•

Person 1: keep holding the robot stable.

•

Person 2: loosen the robot base from the
foundation by removing the attachment
screws and washers.

•

Both persons: grasp the robot at appropri-
ate locations and lay it down on its back on
a working bench. Do not damage the base
socket.

CAUTION

Do not leave the robot standing unfastened to the
foundation, it is not stable on its own.

xx2100000414

Laying down the robot (-10/1.52 and -12/1.27)

Note

Action

CAUTION

The weight of the CRB 15000 robot is up to 51
kg
All lifting accessories used must be sized ac-
cordingly.

Continues on next page

208

Product manual - CRB 15000

3HAC077389-001 Revision: L

5 Repair

5.3.1 Replacing the base cabling

Continued

Содержание CRB 15000







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CRB 15000

Отзывы:

ABB CRB 15000, Руководство по эксплуатации продукта, Страница: 208 / 1096

Результаты поиска

Содержание CRB 15000

Отзывы: