ABB CRB 15000 Скачать руководство пользователя страница 355

Страница: 355 / 1096

Note

Action

xx2000002071

Remove the joint unit from the housing.

CAUTION

The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.

xx2000001957

Remove the lifting aid and guide pins.

Removing the axis-3 joint unit (-10/1.52 and -12/1.27)

Note

Action

xx2300000799

Remove the attachment screws.

Lifting aid: 3HAC087788-001

Fit the lifting aid to the joint unit, on the torque
sensor side.

CAUTION

The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.

Screws: M4x30 (4 pcs)

xx2300000800

xx2300000801

Use two fully attachment screws as removal tools
to press the joint unit out of position.

Continues on next page

Product manual - CRB 15000

355

3HAC077389-001 Revision: L

5 Repair

5.3.4 Replacing the axis-3 cabling

Continued

Содержание CRB 15000







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CRB 15000

Отзывы:

ABB CRB 15000, Руководство по эксплуатации продукта, Страница: 355 / 1096

Результаты поиска

Содержание CRB 15000

Отзывы: