ABB ACS880-1607, Руководство по оборудованию

Страница: 63 / 122

Start-up 63
8
Start-up
Contents of this chapter
This chapter describes the start-up procedure of the converter unit. The information is
valid for cabinet-installed ACS880-1607 DC/DC converter units.
The underlined tasks are needed for certain cases only. The option codes (if any) are
given in brackets. The default device designations (if any) are given in square brackets.
For example: DC/DC converter with the DC switch/disconnector ([Q11], F286).
The same device designations are also used in the circuit diagrams, typically.
These instructions do not cover all possible start-up tasks of a customized drive and
energy storage media. Always refer to the delivery-specific circuit diagrams when
proceeding with the start-up.
WARNING! Only qualified by ABB electricians/engineers are allowed to do the
work described in this chapter. In addition, the electrician/engineer must know the
energy storage system he is about to take in use, and the DC/DC converter
control program and operation principle. Obey all safety instructions in Safety instructions
for ACS880 multidrive cabinets and modules (3AUA0000102301 [English] and Electrical
safety precautions on page 42 . If you ignore the safety instructions, injury or death, or
damage to the equipment can occur.