manualshive.com logo in svg

ABB Ability 800xA Series, Операция, Страница: 304 / 332

Поделиться
Скачать
ABB Ability 800xA Series Скачать руководство пользователя страница 304

DI814

Appendix A  Runtime Templates

304

3BUR002418-600 A

 

The default value is 128. 

DI814

The DI814 templet on an AC 400 Series controller. 

ACTIVE 01 through 16

If the channel is to be active enter a 

YES

. 

 

If the channel will not be used enter a 

NO

.

The default value is YES. 

AUTO DOWNLOAD

To automatically download the configuration to the I/O module enter a YES. In the 
future, if the configuration is to be loaded locally enter a NO. 

Default value is YES.

CLUSTER

Enter the I/O device cluster of the station where this module is located. The cluster 
connected directly to the FCI is number zero (0). The number in this field is 0 -7. 

Default value is 0.

FILTER

Enter the input filter time in msec. 

The valid values are:

 

2, 4, 8 and 16.

The default value is 2. 

LABEL

Enter a characteristic name to identify the DI814 Module of the station. The name 
may contain up to 20 characters.

Содержание Ability 800xA Series













































































































































































































































































































































Отзывы:

Нет отзывов