manualshive.com logo in svg

ABB Ability 800xA Series, Операция

Поделиться
Скачать
ABB Ability 800xA Series Скачать руководство пользователя страница 126

AC460 Subsystem Status Display

Section 6  Status Displays

126

3BUR002418-600 A

 

PROFIBUS Interface

The status of the PROFIBUS Interface will show if it is active, failed or missing. In 
addition, you can select the PROFIBUS LAN

 

display by selecting its display target.

TRIO Interface

The status of the TRIO LAN submodule will show if it is active, failed or missing. 
Select the TRIO Lan display by selecting its display target.

S800 I/O Interface

The status of the S800 I/O Interface submodule will show if it is active, failed or 
missing. In addition, you can select the 

S800

 Lan Overview display for a module by 

selecting its display target.

MVI Interface

MVI (Multi Vendor Interface) is redundant at the port level for PLC I/O. MVI 
redundancy is determined by the controlling application (client) program. 
Redundant ports may reside on the same, or on a different MVI submodule. 
Therefore, no MVI submodule is considered to be a “backup” for another. The 
status of the MVI submodule will show if it is active, failed or missing.

DCN Interface

The DCN interface is similar to the TRIO interface, in that both are considered to be 
active simultaneously, with no preference for either one as primary.

TC520 Monitor Status

The TC520 Status Module information includes the power supply status, fan status 
and user-defined auxiliary status inputs (available from the front panel of the TC520 
status monitor). The status can be either DOWN (red) or ACTIVE (green) for all the 
TC520 functions. If the TC520 monitor status is DOWN, then the status for all the 
other TC520 functions will be UNKNOWN (yellow). The rectangles for the user-
defined auxiliary status inputs (A1, A2, B1, B2) are colored green when active, and 
colored red when inactive.

Содержание Ability 800xA Series













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды