ABATEC WAVE.COM4, Инструкция по эксплуатации

Страница: 6 / 40

INSTRUCTION MANUAL
WE DO IT FIRST.
1.3.0 SCOPE OF APPLICATION
Heater control unit for sauna cabins!
Ready for use only with the supplied original accessories: Control unit, cables, temperature
sensor, thermal safety release, etc.
1.4.0 OVERVIEW/CLEANING
Power unit ASBA:
Electronic control unit for sauna heaters.
The microprocessor-controlled power unit covers a control
range from 30 °C to 110 °C.
The power unit controls the temperature and the internal
cabin light. An electronic clock with buzzer, which reminds
you to sprinkle water on the hot stone, substitutes for the
traditional sand glass.
The humidity can be controlled by an extended module. A
control unit for colour lamps is optionally integrated.
Max. heater output: 9 kW.
Cleaning of the housing: Once a year.
The power unit is maintenance-free. Never open it! If you work on the control unit, disconnect all
poles and switch it off completely from the supply line. Carefully wipe the front of the housing with
a soft cloth slightly moistened with soapy water. Do not clean the back of the housing. If required,
call service personnel!
Operating unit:
Input and display module with foil key pad operating
mode display via LED-display and seven segment
display. The operating unit is connected to the basis
module.
Cleaning of the front foil: the cleaning intervals
depend on the degree of dirt collection.
Disconnect the control unit completely from the
supply line and switch it off all poles. Do not
disassemble! Carefully wipe the front of the housing
with soapy water. Do not clean the back of the housing
and the printed circuit board behind it. If required, call
service personnel.
page 4 of 32