ABATEC WAVE.COM4, Инструкция по эксплуатации

Страница: 5 / 40

INSTRUCTION MANUAL
WE DO IT FIRST.
1.0.0 UNIT DESCRIPTION
1.1.0 GENERAL
The control unit is used exclusively for controlling sauna
cabins.
For normal operation, a sauna cabin with oven is needed
besides the basic package (power unit ASBA with control
unit, sensor and cable).
The instructions of the manual must
be followed when the cabling of the
components is executed.
1.2.0 OPERATIONAL MODE
The control unit is ready for operation, when all installations have been completed. If the control
unit is connected to the system, a self-test starts running, where all LEDs start lighting up.
Afterwards, the control unit changes in the stand-by mode and the LED lights up.
The control unit can be activated when pushing the (OK) button. The control unit starts
working and the interior light will be activated. Depending on the program, the control unit starts
heating and controls the temperature. If the desired temperature has been reached, the heat
output will be reduced. Also the time allowance starts running immediately, depending on the
program.
After expiration of the time allowance, an acoustic signal is programmable. The last settings of the
desired temperature, time interval and brightness will be saved and will be used again after the
control unit is switched-on again. An optional humidity extension for steam-operation and a colour
extension for a light-therapy are possible.
Power unit ASBA
Control unit
page 3 of 32