ABATEC WAVE.COM4, Инструкция по эксплуатации

Страница: 15 / 40

INSTRUCTION MANUAL
WE DO IT FIRST.
2.13.0 VERSION DISPLAY
By pressing the buttons , and at the same time in the stand-by mode, the
software version number of the sauna base unit will be displayed (i.e. “14”).
If you press the button during this time again, the software number of the control unit
will be displayed with the previous “P” (like panel), in order to separate it (i.e. “P14”).
After the time has elapsed, the display turns back to the stand-by mode.
3.0.0
OVERVIEW OF THE COLOUR FUNCTIONS
3.1.0 COLOUR CODING
The colours are assigned the following digits:
0.......... dark, off
5……… green
1……… red 6……… green, blue
2……… red, yellow 7……… blue
3……… yellow 8……… red, yellow, green and blue
4……… yellow, green
3.2.0 COLOUR SWITCH-ON
The control unit must be connected to the supply line. Only the bottom left symbol “ready
for use” lights up. The control unit will be activated if you push the (OK) button and the
colour control unit changes to the last activated condition (automatically or manually).
3.3.0 COLOUR AUTOMATIC MODE
After colour switch-on (refer to 3.2.0), the symbols “ready for use” and “automatic”
light up. The digit displayed shows the actual colours (refer to 3.2.0). After a programmable time,
the control unit changes automatically to the next highest colour. With the buttons, you can
manually change the colours. If you push the buttons at the same time, the colour transition
period of the colour LED modules can be programmed (refer to instruction manual colour LED
module). With the button you get to the programming mode of the automatic time. With
you turn it off.
page 13 of 32