DBC 225
FOR
MX-ONE
86
4/1553-ANF 901 54 Uen D4 2014-01-14
9
Other features
9.1 Account
code
9.1.1 General
The feature account code provides two different functions:
•
Charge a call to an account code instead of charging it to the calling
extension’s number.
•
Prevent unauthorized telecommunication use by forcing the user to
dial an account code before dialing an external number.
Extensions and the external numbers for Least cost routing can be initi-
ated with account code categories. With these two categories it is
possible to decide if the user will have forced or optional account code
dialing.
The procedure for account code normally has to be dialed before the
wanted number. It is also possible to tie an account code to an ongoing
call, both incoming and outgoing. Any previously stored account code
will then be overwritten.
9.1.2 Procedure
9.1.2.1
Predialing of account code
•
Lift the handset.
•
Dial the procedure for account code *FC* account code #, where
FC is the function code for using account code. If provided, dial
tone is received.
•
Continue with the external number. If the category check is nega-
tive (in case of forced account code dialing), the call is rejected.
•
After conversation replace the handset.
Forced
means that the user must have dialed a valid account
code before the destination number otherwise the call is
rejected.
Optional
means that it is not necessary with an account code for
the call. The call is in this case always accepted.