4/1553-ANF 901 54 Uen D4 2014-01-14
95
O
THER
FEATURES
•
Press Select for the framed absence option
•
If required, enter estimated time/date of return (four digits)
•
Press Enter soft key
9.11.2.3
To order from the follow me position for ongoing follow me exten-
sion
•
Lift handset and await dial tone
•
Key * 230 * extension number with ongoing follow me * reason for
absence (one digit) * estimated time/date of return (four digits) #
alternatively
•
Key * 230 * extension number with ongoing follow me * reason for
absence (one digit) #
•
Await verification tone, replace handset
Via an I/O terminal it is possible to program the PBX so that the message
diversion receives higher priority than direct diversion or follow me. If this
is not the case then, for message diversion to function, it will be neces-
sary to cancel the ongoing follow me.
9.11.3
To cancel message diversion
To cancel an ongoing message diversion you key a predetermined code
on your telephone. When you do this, any messages for you will be
printed out on the printer which identity (number) you can state in the
extension code. If you omit this number from the code the messages will
be printed out at a predetermined terminal (printer).
The identity of the printer is stated with 2-5 digits. The number of digits
to be used is programmed into both the PBX and the interception
computer.
•
Ascertain what is applicable for your PBX.
It is also possible to cancel an ongoing message diversion for your
extension from the terminal at the message diversion position.
9.11.3.1 To
cancel
from
your extension telephone
Cancellation means that any waiting messages for your extension will be
printed out.
•
Lift handset and await special dial tone
•
Key # 23 * terminal number (2-5 digits) #