4/1553-ANF 901 54 Uen D4 2014-01-14
55
D
URING
CALLS
If the timer is running, it continues to run but the elapsed timer informa-
tion is not shown in the first row. The display shows instead time and
date in the first row.
The last row indicates a new set of soft-keys available when the timer is
still active but the elapsed time is not shown:
5.11.1.6
To display the time measurement
•
Press the soft-key
ShowTimer
(F3).
The first row will show the elapsed time information. The last row indi-
cates a new set of soft-keys available when the timer is active and
displayed:
5.11.1.7
To exit the time measurement
•
Press the soft-key
Exit
(F4).
The timer function is deactivated and the display is used to show the
corresponding traffic information.
5.11.2 Automatic
Timer
The following functions are valid for both incoming and outgoing calls.
Note:
Soft-keys F1 and F2 have no function for this feature.
F1 Start/Stop
Stop/start time measurement. That is, the
previous function for that key (start or stop) is kept
unchanged.
F2 Clear
Reset the time measurement.
F3 ShowTimer
Display the time measurement
F4 Exit
Exit the time measurement.
F1 Start/Stop
Stop/start time measurement. That is, the
previous function for that key (start or stop) is kept
unchanged.
F2 Clear
Reset the time measurement.
F3 ShowDate
Show date.
F4 Exit
Exit the time measurement.