DBC 225
FOR
MX-ONE
110
4/1553-ANF 901 54 Uen D4 2014-01-14
additional line/multiple represented line-key and dial the corresponding
digit in the same way as above.
10.1.8
To program ringing signal tone character
Ringing signals are generated in the telephone loudspeaker by a tone
ringer. The selection of one of ten different ringing signals tone charac-
ters can be made in programming mode. Each tone corresponds to a
digit between 0 to 9. The following procedure is used:
•
Select the Top menu
Program
.
•
Press the soft-key
Select
.
•
Press a digit-key.
The telephone acknowledges with a ringing signal with a tone that
corresponds to the pressed digit. You may try different characters
until you find a satisfactory one.
•
Press the soft-key
Exit
.
10.1.9
To program ringing signal melody
There is a possibility of changing the normal ringing signal to melodies
for all three different ringing signals, internal, external and call back. The
number of possible tones is 40 for
internal call
and
external call
and
20 for
call back
.
At delivery, there are three different default melodies installed on the
telephone for internal, external and call back.
If a melody is programmed and activated, the corresponding LED is lit
when the melody mode is entered.
Note:
If no melody is programmed for the selected ringing signal, the
selection will be ignored.
10.1.9.1 Melody
mode
In Melody mode you can activate or deactivate the programmed melo-
dies, or enter the Program Melody mode to compose or edit melodies
To enter via the soft-key PhoneSet
•
Select the top menu function
PhoneSet
.
•
Frame the menu Melody Programming and press the soft-key
Select
.
To enter via a key combination: