DBC 225
FOR
MX-ONE
112
4/1553-ANF 901 54 Uen D4 2014-01-14
10.1.9.3
Select ringing type
To select the wanted ringing type to program, press
Line 1, Line 2
or
Inquiry
for Internal call, External call or Call Back respectively. The
corresponding LED starts flashing.
The display shows the corresponding programmed melody (the default
melodies are shown as examples - when no melody is stored, only the
cursor (<) is shown):
Note:
The soft-keys are only available when firmware revision R3F or
later is active for the telephone. See Firmware indications to
check the firmware revision.
11.10 Firmware indication on page 122
10.1.9.4 Creating
a
melody
The telephone has the capability to handle a range of tones. See the
figure and table below to find out which notes and notations correspond
to which key. If the key is pressed and held down for a longer time than
0.5 second, a long tone will be the result. (Shown with a capital letter, for
example D). The sign + shows that the tone has been raised one octave.
The tones are placed on the keyset as follows:
