DBC 225
FOR
MX-ONE
56
4/1553-ANF 901 54 Uen D4 2014-01-14
5.11.2.1 Timer
start
The timer automatically starts on entering into speech state without any
user interaction. The timer is not affected by switching between calls,
inquiries and so on.
The following is the procedure to show the timer function:
•
Press the soft-key
Timer
.
The first row in the display is ready to show the elapsed time (00.00). The
last row indicates the timer functions (soft-keys) available when the timer
is activated and running:
Example of displayed information if the timer function is activated while
the telephone is idle. The picture shows the display information for DBC
225. The clock time is 10:36 and 00:00 indicates the timer counter.
If the soft-key
Timer
is pressed while the timer is already active and
running (but not displayed) the elapsed time information and the corre-
sponding soft-keys are displayed.
5.11.2.2 Timer
stop
The timer automatically stops at the end of the last call.
Note:
The first row in the display shows the elapsed time (stopped). The
last row indicates the soft-keys available when the timer is active
but not running.
5.11.2.3 To
change
from
time measurement to date
•
Press the soft-key
ShowDate
(F3).
F3 ShowDate
Show date.
F4 Exit
Exit the time measurement.
F3 ShowDate
Show date.
F4 Exit
Exit the time measurement.