Annex
249
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Tab. 121 Electrical isolation of interfaces
Tab. 122 Ambient conditions
Tab. 123 Electrical data
Tab. 124 Heat dissipation
7. 4. 4
Design of interface cards, modules and wiring adapters
Tab. 125 Design
Interface
Aastra 415/430
Analogue network interfaces
0.2 kV
Operating isolation
Digital network interfaces BRI
Operating isolation
Control input on ODAB
no isolation, but input impedance > 8 k
Freely connectable relay contacts on ODAB 0.2 kV
Door intercom interface on ODAB
0.2 kV
Control input on FXS interface
no isolation
Control output on FXS interface
no isolation
Audio input
no isolation
Condition
Aastra 415/430
Ambient temperature
5 °C to 45 °C
Relative air humidity
30 % to 80 %, non-condensating
Aastra 415
Aastra 430
Class of protection
1
Input voltage
95 V…253 V, 48…62 Hz
Input current
approx. 0.11 A...0.7 A
approx. 0.11 A...1.0 A
Resistant to voltage breaks
< 6ms
Power input with min. configuration
approx. 15 W
approx. 15 W
Power input with max. configuration
approx. 50 W
approx. 75 W
Undervoltage limit
(system reset, data backup)
< 90 V
Aastra 415
Aastra 430
Maximally configured system
approx. 37 W = 135 kJ/h
approx. 50 W = 180 kJ/h
Card/module
Design
TIC-4TS
B
TIC-2TS
B
ESST
C
TIC-4AB
B
TIC-2AB
B
TIC-1PRI
C
EAAB2
B
