A&D GF-10202M Скачать руководство пользователя страница 120

Страница: 120 / 148

120

（２）

Method of measuring density (specific gravity) of solid

（

function setting

）

Note

□

Re-set the density of the liquid with "(3) Entering the density of a liquid" as necessary, such as

when the temperature of the liquid changes during measurement or when changing the type of
liquid.

□

In the density display, the 3 digits after the decimal point are fixed. The

minimum display cannot be changed by pressing the SAMPLE key.

Density measurement displays the density fixed by measuring the weight
in air and measuring the weight in liquid.

The relationship between each state and display is as follows.

Setting procedure

1. Check the weight measurement mode in air (g lights, blink ).

Press the RE-ZERO key to display zero without
placing anything on the weighing pan.

2. Place the sample on the weighing pan in air and

wait for the display to stabilize.

If outputting the mass of

the sample, press the PRINT key.

Next, press the SAMPLE key to fix the weight in air,
and move to the weight measurement mode in liquid (g
lights, blink ).

3. Transfer the sample from the weighing pan in air to

  the weighing pan in liquid and wait for the display to
  stabilize. If outputting the mass of the sample, press the
    PRINT    key.

Next, press the SAMPLE key to fix the weight in liquid

and shift to the density input mode (g turned off, lights ).

4. Enter the density of the liquid

Refer to "(3) Entering the density of a liquid" and set the
density.
Next, press the PRINT key to enter the density
mode. (g turns off, lights ).

5. If outputting the density, press the PRINT key.

If measuring another sample, press the SAMPLE key

and start with the weighing mode in air. The density unit
is "

6. Re-set the density of the liquid with "(3) Entering the
  density of a liquid" as necessary, such as when the
  temperature of the liquid changes during measurement or
  when changing the type of liquid.

7. Press the MODE key to enter another weighing mode.

From liquid density input

Display the density

turns off, lights

Set the density in liquid

turns offs, lights

Weight in liquid

lights, lights

Weight in air

lights, blinks

Weight measurement mode in air

lights, blinks

Remove the sample

Move the sample from

the pan in air to the pan

in liquid

Place the sample on

the weighing pan in air

Содержание GF-10202M



















































































































































Результаты поиска

Содержание GF-10202M

Отзывы:

Бренды по названию

Популярные бренды

A&D GF-10202M, Инструкция по эксплуатации

Результаты поиска

Содержание GF-10202M

Отзывы:

Бренды по названию

Популярные бренды