A&D AD-8121B, Инструкция по эксплуатации

Страница: 27 / 34

25
11-2 Chart Printing Procedure
Step Operation Printout
1
Set the printer to MODE 2 (DIP switch No.1 ON,
No.2 OFF).
MODE-2
2
Set the instrument data output mode to "stream
mode" (Continuous output) and data format to "A&D
standard format".
3
While holding down the SET key, press the STAT.
key.
CHART MODE
4
Select the target digits for chart printing using the
following keys.
6543210
.
∧
.
∧
(Example when the CL
key is pressed.)
5
While holding down the SET key, press the FEED
key.
INTERVAL TIME
6
Set the time interval using the following keys:
5 SEC.
(Example when the
FEED key is pressed.)
7
Press the DATA key to start chart printing.
See Note 1.
DATE 1 2003/11/22
TIME 111 15:31:46
WT 111 8335.11 11 g
.
∧
.
∧
8
To stop chart printing temporarily, press the SET
key.
See Note 2.
STOP 111 12:40:08
WT 111 8335.14 11 g
.
∧
.
∧
To resume chart printing, press the DATA key.
To exit chart printing, press the CE key or CL key.
To resume chart printing, repeat the procedure
starting with step 3.
CHART OFF
Press the STAT. key to exit chart printing and go to
the statistical calculation mode.
CHART OFF
9
To change the time interval, repeat the procedure
starting with step 5.
Note 1: When no data is sent, the printer waits for the data to be sent.
Note 2: When no data is sent, "
NO DATA
" is printed.
Time interval Key Printout
5 seconds FEED
5 SEC.
10 seconds DATA
10 SEC.
30 seconds STAT.
30 SEC.
1 minute RSLT.
1 MIN.
5 minutes SET
5 MIN.
10 minutes CL
10 MIN.
30 minutes CE
30 MIN.
Target digits Key Printout
10
1
-10
0
CL
6543210
∧∧
10
2
-10
1
SET
6543210
∧∧
10
3
-10
2
RSLT.
6543210
∧∧
10
4
-10
3
STAT.
6543210
∧∧
10
5
-10
4
DATA
6543210
∧∧
10
6
-10
5
FEED
6543210
∧∧