4IPNET WHG315, Руководство пользователя

Страница: 226 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
226
WHG711 Hardware
1 WAN1/ WAN2
(SFP)
Two combo WAN ports (SFP) are connected to the external network,
such as the ADSL Router from your ISP (Internet Service Provider).
2 LAN7/ LAN8
(SFP)
Client machines connect to WHG Controller via these LAN ports (SFP).
3 LED Indicators There are four LED indicators, WAN1, WAN2, LAN7, and LAN8, to
indicate the traffic status of the SFP ports.
4 Reset Press and hold the Reset button for about 5 seconds and status of LED
on front panel will start to blink before restarting the system. Press
and hold the Reset button for more than 10 seconds and status of LED
on the front panel will start to speed up blinking before resetting the
system to default configuration.
5 WAN1/ WAN2 Two WAN ports (10/100/1000 Base-T RJ-45) are connected to the
external network, such as the ADSL Router from your ISP (Internet
Service Provider).
6 LAN1 ~ LAN6,
LAN9 ~ LAN12
Client machines connect to WHG Controller via these LAN ports
(10/100/1000 Base-T RJ-45).
7 USB Reserved for future use.
8 Console The system can be configured via a serial console port. The
administrator can use a terminal emulation program such as Microsoft’s
Hyper Terminal to login to the configuration console interface to change
admin password or monitor system status, etc.
9 LED Indicators There are two LED indicators, Power and Hard-disk, to indicate different
status of the system.
10 LCD Display Allows network administrator to check important system settings such
as network interface, SZ configurations, etc. The navigations buttons
from left to right respectively are “Esc”, “Up”, “Down”, and “Enter”.
WHG801 Hardware
1 LCD Display Allows network administrator to check important system settings such
as network interface, SZ configurations, etc. The navigations buttons
from left to right respectively are “Esc”, “Up”, “Down”, and “Enter”.
2 USB Reserved for future use.
3 Console The system can be configured via a serial console port. The
administrator can use a terminal emulation program such as Microsoft’s
Hyper Terminal to login to the configuration console interface to change