4IPNET WHG315 Скачать руководство пользователя страница 351

Страница: 351 / 368

User’s Manual

WHG Controller / HSG Gateway

ENGLISH

351

7) System Upgrade

The administrator can download the latest firmware from website and upgrade the system here. Click

Browse

to search for the firmware file and click

Apply

for the firmware upgrade. It may take a few minutes

before the upgrade process completes and the system needs to be restarted afterwards to activate the new

firmware.

FTP firmware upgrade is also an option

Enter the FTP server IP address, FTP server port, and the FTP

account name and password, and lastly specify the complete firmware filename stored on the FTP server

that will be used to upgrade the system.

To upgrade the system firmware, click

Browse

button to choose the new firmware file and then click

Apply

button to execute the process. There will be a prompt confirmation message appearing to notify the

administrator to restart the system after successful firmware upgrade. (** Firmware upgrade may take up to

several minutes, please wait for the confirmation message)

The system must be rebooted before resetting to factory defaults after firmware upgrade.

G. Status

Status:

Provides information for System Status, Interface Status, Hardware Status, Routing Table, Online Users,

Session List, User Logs and set up Notification Configuration.

Содержание WHG315

















































































































































































































































































































































































Результаты поиска

Содержание WHG315

Отзывы:

4IPNET WHG315, Руководство пользователя, Страница: 351 / 368

Результаты поиска

Содержание WHG315

Отзывы: