4IPNET WHG315, Руководство пользователя

Страница: 327 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
327
This function allows the administrator to set specific sets of the IP addresses at most for redirection purpose.
When the user attempts to connect to a destination IP address listed here, the connection packet will be
converted and redirected to the corresponding destination. Please enter the
“IP Address”
and
“Port”
of
Destination , and the
“IP Address”
and
“Port”
of Translated to Destination . Select
“TCP”
or
“UDP”
for
the service’s type. These settings will become effective immediately after clicking
Apply .
2) Monitor IP
Multiple IP addresses can be defined in the Monitor IP function. System can monitor these IP based network
devices and periodically report online status via email based on a configurable interval. These monitored
devices can be accessed via HTTP or HTTPS connection. The management interface of the monitored
device can be accessed via a hyperlink of device's IP address when the system is operated under NAT
mode.