4IPNET WHG315 Скачать руководство пользователя страница 337

Страница: 337 / 368

User’s Manual

WHG Controller / HSG Gateway

ENGLISH

337



Passive: RIP packets will not be sent from network interfaces if they are checked as Passive.



Version: Select the RIP version for this interface, RIPv1 uses broadcast to deliver RIP packets, RIPv2

uses Multicast to deliver RIP packets, both uses broadcast and multicast.



Authentication: Allows the authenticating of RIP neighbors. The authentication method "none" means

that no authentication is used for RIP and it is the default method. The two modes of authentication on

an interface for which RIP authentication is enabled: plain text authentication and MD5 authentication.



Advertise as Default Gateway: Inform neighboring nodes that this controller is the default gateway.



Advertise Global Policy Route: Inform neighboring nodes the Global Policy route on this controller.



Redistribute OSPF: Check this option to enable using RIP to distribute routing information acquired via

OSPF.



RIP Timer:



Update timer: Specify the time in seconds when the system will request for immediate update in

routing information.



Timeout Timer: Routes are only kept in the routing table for a limited amount of time. A special

Timeout

timer is started whenever a route is installed in the routing table. Whenever the router

receives another

RIP Response

with information about that route, the route is considered

“refreshed” and its

Timeout

timer is reset. When this timer expires, the route is marked as invalid.

Содержание WHG315

















































































































































































































































































































































































Результаты поиска

Содержание WHG315

Отзывы:

4IPNET WHG315, Руководство пользователя, Страница: 337 / 368

Результаты поиска

Содержание WHG315

Отзывы: