4IPNET WHG315, Руководство пользователя, Страница: 364 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
364

SMTP Server:
Enter the IP address of the sender’s SMTP server.

SMTP Port: By default the port number is 25. Administrator can specify other ports if the SMTP server runs
SMTP over SSL.

Encryption: Enable this option if your SMTP server runs SMTP over TLS or SSL.

SMTP Authentication: The system provides four authentication methods, Plain , Login , CRAM-MD5 and
NTLMv1 , or
“None”
to use none of the above. Depending on which authentication method is selected,
enter the Account Name , Password and Domain .
o
NTLMv1 is not currently available for general use.
o
Plain and CRAM-MD5 are standardized authentication mechanisms while Login and NTLMv1 are
Microsoft proprietary mechanisms. Only Plain and Login can use a UNIX login and password.
Netscape uses Plain . Outlook and Outlook express use Login as default, although they can be set
to use NTLMv1 .
o
Pegasus uses CRAM-MD5 or Login but which method to be used can not be configured.

Sender E-mail Address: The e-mail address of the administrator in charge of the monitoring. This will
show up as the sender’s e-mail.

Receiver E-mail Address (1 ~ 5): Up to 5 E-mail addresses can be set up here to receive notifications.

SYSLOG Settings: Allows the configuration of two external SYSLOG servers where selected users logs as well
as system logs will be sent to.
SYSLOG settings page:

SYSLOG Destinations: Up to two external SYSLOG servers may be configured. Please enter the IP
address and port number of the external SYSLOG server here.
 System Log: This controls the enabling/disabling of the SYSLOG logging feature. When enabled, the
selected logs from “Notification Settings” will be sent to the SYSLOG server configured above. However,
when disabled, no logs will be sent to the SYSLOG server configured above.