4IPNET WHG315, Руководство пользователя, Страница: 87 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
87
(System Status, Service Zone Status, Wireless Status, Access Control Status, and
Associated Client Status).
Administrators may filter the AP List by selecting the desired AP Models. Check the
AP Models under AP Type and click “Apply” to apply the filter.
To add an AP or multiple APs, click the “Add” button. This is elaborated in Section
7.2.2 AP Adding and Discovery.
Options such as Enabling or Disabling an AP, applying Templates and Service Zones
can be done by checking the checkboxes on the left of the AP List and clicking the
respective buttons. Details on AP Templates configuration are elaborated in Section
7.2.3 Templates Configuration.
Note that not all firmware versions are fully compatible with WHG’s AP Management
feature. Check for compatibility under the “Status” column.
7.2.2 AP Adding and Discovery
Configuration path: Main Menu >> Access Points >> Local Area AP Management
>> AP List >> Add
Once all AP’s are properly connected, admin can then start adding them to the
management list. This can be accomplished by clicking “Add” above the AP List. APs