Pannoramic DESK II 1.23 User’s Guide
Appendix – Packaging instructions
Appendix – Packaging instructions
Figure 1.
Preparations
1. Unload the slide from the device by using the scanner software. Remove your slide.
2. Close the scanner software normally.
3. Turn off the scanner with the main switch located on the backside of the device. Disconnect
all the cables of the scanner.
4. Remove the cover from the device by losing 1-1 screw on the side of the scanner.
5. Remove the main camera and camera adapter.
6. Place back and mount the cover of the scanner.
7. Turn off and disconnect all the cables of the workstation and display.
Main parts and their accessories
1. BOX 1 – Big carton box
a) fixing foams for the angles of the scanner box
2. BOX 2 – DESK II scanner – large carton box
a) Scanner unit
June 4, 2018 – Rev. 2
3DHISTECH Ltd.
77(82)
For research and education uses only, not for use in diagnostic procedures.