Pannoramic DESK II 1.23 User’s Guide
4 Software Description
In the Messenger Setup window the following parameters can be set:
•
Message Type
– E-mail (SMTP)
•
Host Address
•
Authentication
–
User ID
and
User Password
are required.
•
Secure connection (SSL)
– If activated, the messages will be sent through secured
connection.
•
Send Test e-mail
– Click this button to send test e-mail to the specified address.
There are 2 feedback messages that come up after sending the e-mail:
◦
“An e-mail has been sent to the recipient.”
◦
“An error has been occurred. The e-mail could not be sent.”
- Check parameters then retry.
If you have properly set messenger settings, click
OK
, then click
Users
in the Message Call
section of the Event Call Settings window to address functions to the recipients (that can be
selected under the
Send Message when:
field).
Figure 23 – Users window
June 4, 2018 - Rev. 2
3DHISTECH Ltd.
43
(
82
)
