3Com VCX V7111, Руководство пользователя

Страница: 133 / 464

3Com
®
VCX V7111 VoIP Gateway User Guide
133
5
Configure the Profiles parameters according to your requirements. For detailed
information on each parameter, see the description of the screen in which it is configured
as an individual parameter.
6
From the Coder Group drop-down list, select the coder group you want to assign to that
Profile. You can select the gateways default coders (see
Coders ) or one of the coder
groups you defined in the Coder Group Settings screen (see Coder Group Settings ).
7
Repeat Steps 2 to 6 for the second to fifth IP Profiles (optional).
8
Click Submit to save your changes.
9
To save the changes so they are available after a power fail, see Saving Configuration .
Table 38
ini File IP Profile Settings
Parameter Description
IPProfile_ID
IPProfile_<Profile ID> =
<Profile Name>,<Preference>,<Coder Group ID>,<IsFaxUsed
*>,<DJBufMinDelay *>, <DJBufOptFactor *>,<IpDiffServ *>,<ControlIPDiffServ
*>,<N/A use $$ instead>, <RTPRedundancyDepth>, <RemoteBaseUDPPort>,
<CNGmode>, <VxxTransportType>, <NSEMode>, <PlayRBTone2IP>,
<EnableEarlyMedia*>, <ProgressIndicator2IP*>
For example:
IPProfile_1 = name1,2,1,0,10,13,15,44,1,1,6000,0,2,0,0,1,0
IPProfile_2 = name2,$$,$$,$$,$$,$$,$$,$$,$$,1,$$,$$,$$,$$,$$,$$,$$
$$ = Not configured, the default value of the parameter is used.
(*) = Common parameter used in both IP and Tel profiles.
This parameter can appear up to 9 times (ID = 1 to 9).
Configuring the Endpoint Phone Numbers
From the Endpoint Phone Number Table screen you can enable and assign telephone
numbers, hunt groups (optional) and profiles to the VoIP gateway ports.
To configure the Endpoint Phone Number table:
1
Open the Endpoint Phone Number Table screen ( Protocol Management menu >
Endpoint Phone Numbers ); the Endpoint Phone NumberTable screen is displayed.