3Com Router 3031, Справочник по командам

Страница: 89 / 838

User Interface Configuration Commands 89
6: Six data bits.
7: Seven data bits.
8: Eight data bits.
Description
Using the databits command, you can set user interface data bit. Using the undo
databits command, you can restore the default data bit setting.
By default, data bit is set to 8.
The configuration can take effect only when the serial interface works in the
asynchronous flow mode.
Example
Set data bit to 5.
[3Com-ui-aux0] databits 5
debugging vty
Syntax
debugging vty { fsm | negotiate }
undo debugging vty { fsm | negotiate }
View
User view
Parameter
fsm: Debugging of the Telnet state machine.
negotiate: Debugging of the VTY negotiation.
Description
Using the debugging vty command, you can enable the debugging of the VTY.
Using the undo debugging vty command you can disable the debugging of the
VTY protocol.
Example
Enable the debugging of the VTY negotiation.
<3Com> debugging vty negotiate
display
user-interface
Syntax
display user-interface [ type-name ] [ number ]