3Com Router 3031, Справочник по командам

Страница: 387 / 838

LAPB and X.25 Configuration Commands 387
For the related commands, see x25 pvc, x25 switch pvc, x25 xot pvc, x25 fr pvc,
x25 switch svc, display x25 vc, and display x25 switch-table svc.
Example
Enable X.25 switching function.
[3Com] x25 switching
x25 timer hold
Syntax
x25 timer hold minutes
undo x25 timer hold
View
Interface view
Parameter
minutes: Value of delay time in minutes, and its value ranges from 0 to 1000. If
the previous call failed at one destination, the X.25 won’t send calls to such a
destination again within the time set by this command.
By default, the delay time is 0.
Description
Using the x25 timer hold command, you can set the delay to send calls to a
destination with failed calls. Using the undo x25 timer hold command, you can
restore its default value.
Frequently sending call requests to a wrong destination (which does not exist or is
faulty) will deteriorate the operating efficiency of the 3Com series router. The use
of this function can avoid this problem to a certain extent. If this parameter is set
to 0, it is equal to disabling the function. In addition, this function is only effective
to the calls originated from the local. That is to say, this parameter is meaningless
when the X.25 operates in the switching mode.
For the related command, see display interface.
Example
Set the parameter of the X.25 interface Serial0/0/0 to 5 minutes.
[3Com-Serial0/0/0] x25 timer hold 5
x25 timer idle
Syntax
x25 timer idle minutes
undo x25 timer idle