3Com Router 3031, Справочник по командам

Страница: 277 / 838

ISDN Configuration Commands 277
[3Com-Bri0/0/0] isdn ignore sending-complete outgoing
isdn L3-timer Syntax
isdn L3-timer timer-name time-interval
undo isdn L3-timer { timer-name | all }
View
ISDN interface view
Parameter
timer-name: Name of a L3 timer of the ISDN protocol.
time-interval: Timer duration, which can take on one of the values listed in the
following table.
all: Restores the default durations of all the L3 timers.
Table 10 Description of Q931 timers
Description
Using the isdn L3-timer command, you can configure the duration of an ISDN L3
timer. Using the undo isdn L3-timer command, you can restore the default
duration of the ISDN L3 timer on the interface.
You can view the default durations of the L3 timers in the ISDN protocol by
executing the display isdn parameters command.
Example
Set the duration of the L3 timer T301 on the interface Bri 0/0/0 to 160 seconds.
[3Com-Bri0/0/0] isdn l3-timer t301 160
isdn number-property Syntax
isdn number-property number-property [ calling | called ]
undo isdn number-property [ calling | called ]
timer-name Value range (in units) Default (in units)
t301
30 ~ 1200
240
t302
5 ~ 60
15
t303
2 ~ 10
4
t304
10 ~ 60
30
t305
4 ~ 30
30
t308
2 ~ 10
4
t309
10 ~ 180
90
t310
10 ~ 180
40
t313
2 ~ 10
4
t316
2 ~ 180
120
t322
2 ~ 10
4