3Com Router 3031, Справочник по командам

Страница: 42 / 838

42 C
HAPTER
2: S
YSTEM
M
AINTENANCE
& M
ANAGEMENT
C
OMMANDS
Table 2 Definition of information level
*: Indicate multiple choices can be selected. At least one choice must be selected
and all the choices can be selected at most.
Description
Using the info-center source command, you can add records to an information
channel. Using the undo info-center source command, you can remove the
records from the information channel.
For a specified module, by default,
The state of logging information output is on and the allowed information level is
informational.
The state of trapping information output is on and the allowed information level is
informational.
The state of debugging information ouput is off.
So far, the system allocates one information channel for each output direction.
They are:
Output directionInformation channel number Default information channel name
Console 0 console
Monitor terminal1 monitor
Loghost 2 loghost
Trapbuffer 3 trapbuffer
Logbuffer 4 logbuffer
snmp 5snmpagent
In addition, each information channel has a default record for which the module
name and number are default and 0xffff0000. But for different channels, the
record may have different default settings for logging information, trapping
information, and debugging information. If a module has no explicit configuration
record in the channel, the default configuration record will be used.
Severity level Description
emergencies
Extremely emergent errors
alerts Errors requiring immediate correction
critical Critical errors
errors Errors that is not critical but require your concern
warnings Warning indicating that there may be some errors
notifications
Information needs your concern
informational Common prompt information
debugging Debugging information