3Com Router 3031, Справочник по командам

Страница: 158 / 838

158 C
HAPTER
3: I
NTERFACE
M
ANAGEMENT
C
OMMANDS
Example
Set the FE interface to work in 10Base-T mode.
[ 3com -Ethernet0/0/0]speed 10
Fundamental WAN
Interface
Configuration
Commands
async mode Syntax
async mode { protocol | flow }
View
Asynchronous serial interface view, AUX interface view
Parameter
protocol: Protocol mode, with which the local end directly adopts the configured
link layer protocol parameters to set up a link with the remote end after setting up
a physical link.
flow: Flow mode, which is also known as interactive mode. With this approach,
the two ends set up a link by interacting with each other upon the setup of a
physical link. Specifically, the calling party sends the configuration commands to
the called party (it is equal to the operation of manually inputting configuration
commands at the remote end), sets the link layer protocol operating parameters of
the called party, and then sets up the link. This approach is normally adopted in
the event of man-machine interaction.
Description
Using the async mode command, you can set the operating mode of an
asynchronous serial interface.
By default, the asynchronous serial interface is working in protocol mode and the
AUX interface in flow mode.
For related command, see modem.
Example
Set the asynchronous serial interface to work in flow mode.
[3com-Serial0/0/0]async mode flow
baudrate Syntax
baudrate baudrate