3Com Router 3031, Справочник по командам

Страница: 54 / 838

54 C
HAPTER
2: S
YSTEM
M
AINTENANCE
& M
ANAGEMENT
C
OMMANDS
Description
Using the schedule reboot delay command, you can enable the timing reboot
router function and set the waiting time.
By default, the timing reboot router function is disabled.
Two formats can be used to set the waiting delay of timing reboot router, namely
the format of "hour: minute" and the format of "absolute minutes". But the total
minutes should be no more than 30×24×60 minutes, or 30 days.
After this command is configured, the system will prompt you to input
confirmation information. Only after the "Y" or the "y" is entered can the
configuration be valid. If there is related configuration before, it will be covered
directly.
Moreover, after the schedule reboot at command is configured, and the system
time is adjusted by the clock command, the original schedule reboot at parameter
will become invalid.
For the related command, see reboot, schedule reboot at, undo schedule reboot,
display schedule reboot.
Example
Configure the router to be restarted after 88 minutes (the current time is 21:32).
<3Com> schedule reboot delay 88
Reboot scheduled for 23:00:00 UTC 2002/11/1 (in 1 hours and 28
minutes)
Proceed with reboot? [Y/N]:y
upgrade
Syntax
upgrade [ bootrom | pico-code] filename
View
System view
Parameter
bootrom: Upgrades the BootROM on line .
pico-code: Upgrades the pico-code on line.
filename: The file name of the upgrade software package to be used.
Description
Using the upgrade command, you can upgrade the BootRom program, pico-code
or the logic.