3Com Router 3031, Справочник по командам

Страница: 37 / 838

Information Processing Commands 37
Description
Using the info-center enable command, you can enable the info-center. Using the
undo info-center enable command, you can disable the info-center.
By default, the info-center has been enabled.
Only when the info-center has been enabled will the system output information to
the loghost and the console.
For related commands, see info-center loghost, info-center logbuffer, info-center
trapbuffer, info-center console channel, info-center monitor channel, display
info-center.
Example
Enable the info-center.
[3Com] info-center enable
% information center is enabled
info-center logbuffer
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize
] *
undo info-center logbuffer [ channel | size ]
View
System view
Parameter
channel: Sets the channel for information output to the logbuffer.
channel-number: Channel number ranging 0 to 9. That is, the system has 10
channels.
channel-name: Channel name.
size: Sets logbuffer size.
buffersize: Size of the logbuffer (the accommodated message entries).
Description
Using the info-center logbuffer command, you can enable the logbuffer and set
the channel number for logging information output as well as the size of the
logging buffer. Using the undo info-center logbuffer command, you can cancel
the current settings.
By default, information outputted to the logbuffer is allowed and the logbuffer
size is 256.
Only when the info-center has been enabled can this command become effective.