3Com Router 3031, Справочник по командам

Страница: 656 / 838

656 C
HAPTER
6: R
OUTING
P
ROTOCOL
■
peer-address: Specifies IP address of a peer.
Description
Using the peer public-as-only command, you can configure not to carry the AS
number when transmitting BGP update packets. Using the undo peer
public-as-only command, you can configure to carry the AS number when
transmitting BGP update packets.
By default, private AS number is carried when transmitting BGP update packets.
Generally, BGP transmits BGP update packets with the AS number (either public
AS number or private AS number). To enable some outbound routers to ignore the
AS number when transmitting update packets, you can configure not to carry the
AS number when transmitting BGP update packets.
Example
Configure not to carry the private AS number when transmitting BGP update
packets to the peer named test.
[3Com-bgp] peer test public-as-only
peer reflect-client Syntax
peer { group-name } reflect-client
undo peer { group-name } reflect-client
View
BGP view or VPNv4 view
Parameter
■
group-name: Specifies the name of peer group.
Description
Using the peer reflect-client command, you can configure a peer/peer group as the
route reflector client. Using the undo peer reflect-client command, you can cancel
the existing configuration.
By default, no route reflector is in AS.
Generally speaking, it is not necessary to configure this command for the peer
group, because IBGP peers are in its default group. A single peer
peer-address
reflect-client command should be used to configure the route reflector clients.
For the related commands, see reflect between-clients and reflect cluster-id.
Example
Configure the peer group "test" as the route reflector client.
[3Com-bgp] peer test reflect-client
peer route-policy
Syntax
peer { group-name | peer-address } route-policy route-policy-name { import |
export }
undo peer { group-name | peer-address } route-policy route-policy-name { import |
export }