3Com Router 3031, Справочник по командам

Страница: 371 / 838

LAPB and X.25 Configuration Commands 371
■
round-robin: Select call channel using cyclic selection policy.
■
vc-number: Select call channel using the policy of computing available logical
channel.
Description
Using the x25 hunt-group command, you can create or enter an X.25 hunt group.
Using the undo x25 hunt-group command, you can delete the specified X.25 hunt
group.
X.25 hunt group supports two call channel selection policies: round-robin mode
and vc-number mode, and a hunt group only uses one channel selection policy.
The round-robin mode will select next interface or XOT channel inside hunt group
for each call request using cyclic selection method. The vc-number mode will
select the interface with the most idle-logical channels in hunt group for each call
request.
A hunt group can have 10 interfaces or XOT channels at most, and it may
nondistinctively select the available channels between interface and XOT channel.
XOT channel cannot join the hunt group that adopts the vc-number selection
policy.
For the related command, see display x25 hunt-group.
Example
Create hunt group hg1 which uses cyclic selection policy.
[3Com] x25 hunt-group hg1 round-robin
[3Com-hg-hg1]
x25 ignore
called-address
Syntax
x25 ignore called-address
undo x25 ignore called-address
View
Interface view
Parameter
None
Description
Using the x25 ignore called-address command, you can enable it to ignore the
X.121 address of the called DTE when X.25 initiates calls. Using the undo x25
ignore called-address command, you can disable this function.
By default, this function is disabled.