3Com 4200G 12-Port, Руководство по настройке

Страница: 363 / 422

Information Center Configuration 349
To view debug information of specific modules, you need to set the information type
as debug in the
info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
Enabling Information
Output to the SNMP
Table 306 lists the related configurations on the switch.
To view debug information of specific modules, you need to set the information type
as
debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
To send information to remote SNMP workstation properly, related configurations are
required on both the switch and the SNMP workstation.
Enable information
output to the trap
buffer info-center trapbuffer
[ channel
{
channel - number |
channel - name } ] [ size
buffersize ]
Optional
By default, the switch outputs
information to the trap buffer,
which can holds up to 256 items by
default.
Define an information
source info - center source { modu - name
| default } channel
{ channel - number |
channel - name } [ { log | trap |
debug } * { level severity | state
state } * ]
Required
Set the format of time
stamp info-center timestamp { log |
trap | debugging } { boot | date
| none }
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.
Table 305 Enable information output to the trap buffer
Operation Command Description
Table 306 Enable information output to the SNMP
Operation Command Description
Enter system view system-view —
Enable the information
center info-center enable Optional
By default, the information center is
enabled.
Enable information
output to the SNMP info-center snmp channel
{ channel - number |
channel - name }
Required
By default, SNMP information goes
through channel 5.
Define an information
source info - center source { modu - name
| default } channel
{ channel - number |
channel - name } [
{
log | trap |
debug } * { level severity | state
state } * ]
Required
Set the format of time
stamp info-center timestamp { log |
trap | debugging } { boot | date
| none }
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.