3Com 4007 Скачать руководство пользователя страница 247 | Manualshive

Страница: 247 / 684

3Com 4007 Скачать руководство пользователя страница 247

Key Concepts

247

■

GARP VLAN Registration Protocol (GVRP)

— This protocol, which

is defined in IEEE 802.1Q, defines dynamic registration of VLANs that
use IEEE 802.1Q tagging (the VLAN ID). GVRP is supported for this
release on Multilayer Switching Modules.

Tagging Types

The system supports per-port tagging (that is, you can select IEEE 802.1Q
tagging or no tagging on a per-port basis). Tagging and non-tagging
ports can coexist in the same VLAN group.

■

Non-tagging mode

— The default tagging mode. Use this tagging

mode for front-panel ports if the environment includes end stations
that do not support 802.1Q VLANs. Non-tagged VLAN ports accept
tagged frames; however, any traffic transmitted from an untagged
port on a VLAN is untagged.

■

802.1Q tagging mode

— With this form of tagging, VLAN frames

are encapsulated and tagged as specified in the IEEE 802.1Q standard.
In frame tagging mode, an explicit header that identifies to which
VLAN the frame belongs is inserted into each frame of interswitch
data. Frames in the same VLAN can be tagged or untagged. An
untagged port in a VLAN cannot insert a tag, but it can recognize a
tagged frame. Use this mode for VLANs in an IEEE 802.1Q
environment.

You must evaluate tagging for each switching module’s front-panel ports
and backplane ports as well as the switch fabric module ports:

■

For front-panel ports, you must use tagging when you have ports
shared by different VLANs (VLANs that overlap on ports) and there is
no other distinguishing characteristic. For port-based VLANs, tagging
must be used to distinguish the shared ports (only

one

VLAN’s shared

front-panel ports can be untagged; in all other VLANs, the shared
ports must be tagged). For VLANs on Multilayer Switching Modules,
tagging is required to differentiate between shared ports of the same
protocol type and overlapped IP Layer 3 VLANs in allClosed mode.

«
...
245
246
247
248
249
...
»

Содержание 4007













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов