3Com 4007, Руководство по внедрению, Страница: 134 / 684

134 C
HAPTER
6: M
ODULE
P
ARAMETERS
Module Parameters
Overview
You use the module parameters to set values for specific functions, or to
modify values that are set on a module during power-on. You can modify
only some of the module parameters values.
Features Using the module parameters, you can set or modify the factory default
values for a module in your Switch 4007 system for the following
functions:
■
Display the module’s current configuration
■
Take a snapshot of a module’s current configuration and status
■
Create and administer a statistics baseline
See the Switch 4007 Command Reference Guide for detailed
information about creating and maintaining baselines.
If you set a baseline while connected to a module and then disconnect
from that module, the baseline is disabled. You must reconnect to the
module and use the
requestedState
option to change the baseline value
for that module to
enable
.
■
Administer nvData
This chapter discusses the redundancy and administering nvData options.
You can also use the module parameters to:
■
Modify the module name
■
View the module’s date and time
■
Clear the module’s diagnostics block
■
Reboot the module
See the Switch 4007 Command Reference Guide or online Help for more
information about how to set and modify module parameters.
Benefits Using the module parameters to set and modify module functions:
■
Provides an easy method for both setting and modifying module-level
functions
■
Decreases the time and cost that it takes to modify a module
configuration if you have to constantly make changes from the same
source then reboot the module to apply the changes