manualshive.com logo in svg

3Com 4007, Руководство по внедрению, Страница: 230 / 684

Поделиться
Скачать
3Com 4007 Скачать руководство пользователя страница 230

230

C

HAPTER

 12: T

RUNKING

Automatic 
Backplane Trunking

Provides automatic backplane trunking on both the switch fabric module 
and the managed interface modules (such as the 4-port GBIC GEN 
Interface Module). You can enable or disable this feature at the switch 
fabric module for any or all of the interface modules.

The 24-port Gigabit Switch Fabric Module (Model Number 3CB9FG24T) 
utilizes the chassis backplane traces on a slot-by-slot basis. Trunking is 
performed through the switch fabric module backplane and not through 
the interface modules.

Important

Considerations

■

Automatic backplane trunking is provided only through the switch 
fabric module.

■

If automatic backplane trunking is enabled, then you cannot configure 
backplane port trunking on the switch fabric module or interface 
modules. If you enable a slot, that slot automatically trunks any 
backplane ports.

■

If automatic backplane trunking is disabled, then you can configure 
backplane trunking on the switch fabric module and have those 
trunks automatically configured at the managed interface module. 
This centralizes the trunking application through the switch fabric 
module.

■

Staging is not supported if autoMap is enabled on the module.

■

The autoMap feature does not support single-port trunk groups. No 
backplane trunks containing fewer than two ports can be defined on 
the switch fabric module. However, on the interface module, a single 
port trunk is allowed only when the switch fabric module has a trunk 
already defined.

Содержание 4007













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов