manualshive.com logo in svg

3Com 3Com SuperStack 3 Switch 3800 Family, Руководство пользователя

Поделиться
Скачать
3Com 3Com SuperStack 3 Switch 3800 Family Скачать руководство пользователя страница 147

A

S

AFETY

 I

NFORMATION

You must read the following safety information before carrying out any 
installation or removal of components, or any maintenance procedures 
on the Switch 3800.

Important Safety 
Information

WARNING: 

Warnings contain directions that you must follow for your 

personal safety. Follow all instructions carefully.

Please read the following safety information thoroughly before 
installing the Switch 3800.

■

Installation and removal of the unit must be carried out by qualified 
personnel only.

■

To reduce the risk of fire or electric shock, install the unit in a 
temperature and humidity controlled indoor area free of conductive 
contaminants.

Power

■

To ensure compliance with international safety standards, only use 
the power adapter that is supplied with the unit.

■

Disconnect the power adapter before removing the unit.

■

The unit must be earthed (grounded).

■

The unit must be connected to an earthed (grounded) outlet to 
comply with European safety standards.

■

Do not connect the unit to an A.C. outlet (power supply) without 
an earth (ground) connection.

■

The socket outlet must be near to the unit and easily accessible. You 
can only remove power from the unit by disconnecting the power 
cord from the outlet.

SW3800.BK  Page 1  Tuesday, May 5, 1998  5:20 PM

Содержание 3Com SuperStack 3 Switch 3800 Family























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды