manualshive.com logo in svg

3Com 3Com SuperStack 3 Switch 3800 Family, Руководство пользователя

Поделиться
Скачать
3Com 3Com SuperStack 3 Switch 3800 Family Скачать руководство пользователя страница 128

9-2

C

HAPTER

 9: S

TATUS

 M

ONITORING

 

AND

 S

TATISTICS

show ip config {vlan <name> | all}

Displays configuration information for one or more VLANs, 
including the following:

■

IP address, subnet mask

■

IP forwarding information

■

BOOTP configuration

■

VLAN name, VLANid

show iparp {<ip_address> | vlan 
<name> | all | permanent}

Displays the current Address Resolution Protocol (ARP) cache 
for a selected IP address, VLAN, or all entries. With no options, 
information for all VLANs is displayed. Information displayed 
includes IP address, MAC address, aging timer value, VLAN 
name, VLANid, and port number.

show ipfdb {<ipaddress> | vlan 
<name> | all}

Displays the contents of the IP forwarding database table. Use 
for technical support purposes.

show iproute vlan {<name> | all | 
permanent}

Displays the contents of the IP routing table.

show ipstats {vlan [<name> | all]}

Displays statistics of packets handled by the CPU, including the 
following:

■

inpackets, outpackets

■

ICMP/IGMP statistics

■

IRDP statistics

show log {<priority>} {<subsystem>}

Displays the current snapshot of the log. Options include:

■

priority — Filters the log to display messages with the 
selected priority or higher (more critical). Priorities include 
critical, warning, and informational. If not specified, 
informational priority messages and higher are displayed.

■

subsystem — Filters the log to display messages associated 
with the selected Switch subsystem. Subsystems include 
Syst, STP Brdg, SNMP, Telnet, VLAN, and Port. If not 
specified, all subsystems are displayed.

show log config

Displays the log configuration, including the syslog host IP 
address, the priority level of messages being logged locally, 
and the priority level of messages being sent to the syslog 
host.

show management

Displays network management configuration and statics 
including enable/disable states for Telnet and SNMP, SNMP 
community strings, authorized SNMP station list, SNMP trap 
receiver list, and logon statistics.

show memory

Displays summary system configuration and memory utilization 
statistics for the CPU system DRAM.

(continued)

Table 9-1   

Switch Monitoring Commands (continued)

Command

Description

SW3800.BK  Page 2  Tuesday, May 5, 1998  5:20 PM

Содержание 3Com SuperStack 3 Switch 3800 Family























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды