2N Access Unit, Руководство по настройке

Страница: 36 / 134

2N Access Unit Configuration Manual
36 / 134
•
•
•
•
•
•
5.3.1 Switches
Switches provide a very flexible and efficient control of such peripherals connected to the
Access Unit as electric door locks, lighting, additional ringing signalling, and so
on. 2N Access
Unit allows you to configure to 2 independent all-purpose switches.
A switch can be activated by:
entering a valid code via the 2N Access Unit numeric keypad,
tapping a valid RFID card on the reader,
a predefined delay after another switch activation,
by a time profile *),
receiving an HTTP command from another LAN device *),
the Action.ActivateSwitch action via Automation *).
Switch activation can be blocked by an appropriately selected time profile if necessary.
Switch locking and hold
The switch activation conditions are modified using two functions: switch locking and switch
hold. If a switch is locked, it is permanently deactivated and cannot be operated until unlocked
(locked has a higher priority than held – in case the switch is locked and held simultaneously,
locking is applied). If held, the switch is in the activated state and cannot be operated until
•
Caution
The options marked with *) require their respective active licences.
