2N Access Unit Configuration Manual
123
/
134
•
•
•
•
•
•
•
•
•
At Boot Time
– enable check and, if possible, update execution upon every intercom start.
Update Period
– set the update period. Set an automatic update to take place hourly/
daily/weekly/monthly, or set the period manually.
Update At
– set the update time in the HH:MM format for periodical updating at a low-
traffic time. The parameter is not applied if the update period is set to a value shorter than
1 day.
Next Update At
– set the next update time.
Last Update At
– last update time
.
Update Result (Common Config)
– last update result. The following options are
available: DHCP option 66 failed, Firmware is up to date, Server connection failed,
Running..., File not found.
Communication Result Detail(Common Config)
– server communication error code or
TFTP/HTTP status code.
Update Result (Private Config)
– private configuration follows the common
configuration update. The device with private configuration is identified by its MAC
address.
The following options are available: DHCP option 66 failed, Firmware is up to
date, Server connection failed, Running..., File not found.
Communication Result Detail
(Private Config)
– server communication error code or
TFTP/HTTP status code.
Содержание Access Unit
