2N Access Unit, Руководство по настройке

Страница: 41 / 134

2N Access Unit Configuration Manual
41 / 134
•
•
•
•
•
•
Synchronise with – set switch synchronisation to enable automatic switch activation
after another switch activation with a predefined delay. Define the delay in
the Synchronisation Ddelay parameter.
Synchronisation Delay – set the time interval between synchronised activations of two
switches. The parameter will not be applied unless the Synchronise function is enabled.
Switch-On Command – set the command to be sent to the external device (WEB relay,
e.g.) upon switch activation. The command is sent via the HTTP (GET request) and must be
as follows: http://ip_address/path . E.g.: http://192.168.1.50/relay1=on .
Switch-Off Command – set the command to be sent to the external device (WEB relay,
e.g.) upon switch deactivation. The command is sent via the HTTP (GET request) and must
be as follows:
http://ip_address/path . E.g.: http://192.168.1.50/relay1=off
Username – enter the username for the external device (WEB relay, e.g.) authentication.
The parameter is obligatory only if the external device requires authentication.
Password – enter the external device (WEB relay, e.g.) authentication password. The
parameter is obligatory only if the external device requires authentication.