2N Access Unit, Руководство по настройке

Страница: 120 / 134

2N Access Unit Configuration Manual
120 / 134
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DHCP (Option 66/150) Address – check the server address retrieved via the DHCP Option
66 or 150.
File Path – set the firmware/configuration filename directory or prefix on the server. The
intercom expects the XhipY_firmware.bin, XhipY-common.xml and XhipY-MACADDR.xml
files, where X is the prefix specified herein and Y specifies the intercom model.
Use Authentication – enable authentication for HTTP server access.
Username – enter the user name for server authentication.
Password – enter the password for server authentication.
Trusted Certificate – set the set of CA certificates for validation of the ACS public
certificate.
User Certificate – specify the user certificate and private key to validate the intercom
right to communicate with the ACS.
At Boot Time – enable check and/or execution of update upon every 2N Access Unit start.
Update Period – set the update period. Set an automatic update to take place hourly/
daily/weekly/monthly, or set the period manually.
Update At – set the update time in the HH:MM format for periodical updating at a low-
traffic time. The parameter is not applied if the update period is set to a value shorter than
1 day.
Next Update At – display the next update time.
Last Update At – last update time.
Update Result – last update result. The following options are available: DHCP option 66
failed, Firmware is up to date, Server connection failed, Running..., File not found.
Communication Result Detail – server communication error code or TFTP/HTTP status
code.