2N Access Unit Configuration Manual
105
/
134
•
•
•
•
•
•
•
•
•
Use DHCP Server
– enable automatic obtaining of the IP address from the LAN DHCP
server. If the DHCP server is unavailable or inaccessible in your LAN, use the manual
network settings.
Static IP Address
– display the static IP address of the
2N
Access Unit
, which is used
together with the below mentioned parameters if the Use DHCP Server parameter is
disabled.
Network Mask
– set the network mask.
Default Gateway
– set the address of the default gateway, which provides
communication with off-LAN equipment.
Primary DNS
– set the primary DNS server address for translation of domain names to IP
addresses. The primary DNS value is 8.8.8.8 upon factory reset.
Secondary DNS
– set the secondary DNS server address, which is used in case the primary
DNS is inaccessible. The secondary DNS value is 8.8.4.4 upon factory reset.
Hostname
– set the 2N IP intercom network identification.
Vendor Class Identifier
–
set the vendor class identifier as a string of characters for DHCP
Option 60.
VLAN Enabled
–
enable the virtual network (VLAN) support (according to
recommendation 802.1q). Set the virtual network ID too to make the function work
properly.
Содержание Access Unit
