2gig Technologies GO!control 2GIG-CNTRL2, Инструкции по установке и программированию

Страница: 17 / 52

15
Programming Navigation
Figure 40. Navigation Arrows & Go To Button
Figure 41. Questions without Sub-options
Figure 42. Questions with Sub-options
Figure 43. Questions with Data to Enter
Figure 44. Other Buttons Displayed
When the installer is using the System Confi guration menus,
the Control Panel will present each programming question
sequentially. Most programming questions have a single numeric
value response or a simple enabled/disabled selection. Some
programming questions have sub-options that can be set. These
sub-options are displayed for the question selected and can be
accessed through navigation keys on the display.
Navigation Arrows & Go To Button
The programming question screens display up, down, left, and
right navigation arrows. They are used to move through the
programming questions and sub-options.
The G O TO button is used to jump directly to a programming
question. Pressing G O TO will prompt the installer for the two-digit
question number to jump to. The G O TO button changes to CANCEL
while waiting for a question number, press CANCEL to back out.
Questions without Sub-options
Most of the programming questions do not have sub-options. They
navigate as follows.
Questions without sub-options do not
display a SKIP button.
• The
↑
&
↓
arrows select the next or previous programming question.
• The
←
&
→
arrows choose values for the question or move the cursor left
and right along the white data entry fi eld.
Questions with Sub-options
Some of the programming questions have sub-options. They
navigate as follows.
Questions with sub-options display a SKIP
button during the question.
• The SKIP button advances to the next programming question/section.
• The
↑
&
↓
arrows select the next or previous programming sub-question.
• The
←
&
→
arrows choose values for the question or move the cursor left
and right along the white data entry fi eld.
Questions with Data to Enter
Some of the programming questions require entering numeric or
alphabetic data. For devices that can be named, the Control Panel
contains a large vocabulary with words to choose from (see Pg. 19).
• The INSERT button displays a word from the vocabulary. The words can
be scrolled through using the
←
&
→
arrows, or selected by entering their
3-digit index number.
• The (backspace) button moves the cursor to the left, deleting the one
character at a time.
• The (delete) button deletes a character to the right of the cursor, or any
characters that are highlighted.
• The FWD (forward) button highlights the next word in multi-word data fi elds.
• The B ACK button highlights the previous word in multi-word data fi elds. The
B ACK button displays the previous screen in some cases.
• When the SHIFT button is displayed, pressing it will display alternate
characters on the keypad that can be used for data entry.
Other Buttons Displayed
Depending on the programming question, other buttons may be displayed.
• The ESC (escape) button serves as an “undo”. Pressing ESC restores the
value that was previously stored for the question or sub-question.
• The SUM (summary) button displays a summary of the values stored for the
programming question and sub-options.
• The END button displays a summary of the values stored for the entire
Control Panel memory.
• The LEARN button is used to set the system to receive a sensor’s serial
number when transmitted during programming the wireless sensors.
• The PASTE button repeats the last sensor serial number entered.
• The EXIT button exits programming.