![background image](http://html.mh-extra.com/html/2gig-technologies/gc3/gc3_user-manual_439576084.webp)
Proprietary & Confidential
11 Smart Home Settings
TIP:
Typically, you can trigger a device on the
network by either powering the device OFF/ON,
pressing a button once or twice, or flipping a switch
on the device. Every device is different.
When the system discovers a device, the
New Device Found
and
Adding Device
message appears.
Figure 7
Adding Device
4.
At the
New Device Was Added to the System
message, tap
OK
.
Figure 8
New Device was Added to the System Message
The newly discovered device appears in the
Listening for
Devices to Add
screen. Any device information captured during
the discovery process appears below the device name.
Figure 9
Listening for Devices to Add—New Device
You can continue by renaming the device. See "Rename a
Device" below.
Rename a Device
To rename a device on the network:
1.
Add a device to the Controller's network. See "Add a New
Device" on the previous page.
2.
At the
Listening for Devices to Add
screen, tap
Rename
.
Figure 10
Listening for Devices to Add—Rename
3.
At the
Enter a Name for this Device
screen, use the
touchscreen keypad to enter a new device name.
For example, enter:
Living Room Dimmer
Figure 11
Enter a Name for this Device
4.
Tap
Done
.
The system reveals the new name on the
Listening for
Devices to Add
screen.
Figure 12
Listening for Devices to Add—New Device Name
From the
Listening for Devices to Add
screen, you can continue by
triggering the next desired device and then renaming it as needed.
Remove a Device
To remove a device from the network:
1.
Navigate to the
Smart Home Settings
menu. See "Navigate to
the Smart Home Settings Menu" on the previous page.
2.
At the
Smart Home Settings
menu, tap
Remove Devices
.
Copyright © 2015 Nortek Security & Control LLC
84