![background image](http://html.mh-extra.com/html/2gig-technologies/gc3/gc3_user-manual_439576069.webp)
The newly discovered device appears in the
Listening for
Devices to Add
. Any device information captured during the
discovery process appears below the device name.
Figure 13
New Device Added
Continue by renaming the device. See "Renaming a Z-Wave Device on
the Network" below.
Renaming a Z-Wave Device on the Network
To rename a device on the network:
1.
At the
Listening for Devices to Add
screen, tap
Rename
.
2.
At the
Enter a Name for this Device
screen, use the
touchscreen keypad to enter the new name.
For this example, enter:
Living Room Dimmer
3.
Tap
Done
.
The system reveals the new name on the
Listening for
Devices to Add
screen.
Removing a Device from the Network
To remove a device from the network:
1.
At the Home screen, tap
System Settings
.
2.
Enter the Master User Code to access the
System Settings
menu.
3.
At the
System Settings
menu, tap
Smart Home Settings
.
4.
NOTE:
Consult your installer to determine if this
feature is available. This feature is not enabled on all
systems.
5.
At the
Smart Home Settings
menu, tap
Remove Devices
.
10 System Settings
Proprietary & Confidential
69
Copyright © 2015 Nortek Security & Control LLC