![background image](http://html.mh-extra.com/html/2gig-technologies/gc3/gc3_user-manual_439576087.webp)
Figure 25
View All Devices > Remove
4.
At the
Force Remove Device (<Device Name>)
screen, tap
Remove
.
Figure 26
Force Remove Device—Remove
The system removes the device from the network.
Figure 27
Device Removed
Reset the Controller
You can reset the Z-Wave controller to remove all Z-Wave devices from
the network and to reset the controller to its factory default state.
NOTE:
Use this procedure only in the event that the network
primary controller is missing or otherwise inoperable.
To reset the controller:
1.
Navigate to the
Smart Home Settings
menu. See "Navigate to
the Smart Home Settings Menu" on page 83.
2.
At the
Smart Home Settings
menu, tap
Advanced Settings
.
Figure 28
Smart Home Settings—Advanced Settings
3.
At the
Advanced Settings
menu, tap
Reset Controller
.
Figure 29
Advanced Settings—Reset Controller
4.
At the
Reset the Z-Wave Controller
screen, tap
Reset
Controller
.
Figure 30
Reset the Z-Wave Controller—Reset Controller
NOTE:
Resetting the controller will delete all node
information from the GC3 Control Panel. Any
devices that were part of the mesh network will need
to be manually removed from the network before
they can be added to another network.
While the controller is being reset, the
Working
message
appears.
11 Smart Home Settings
Proprietary & Confidential
87
Copyright © 2015 Nortek Security & Control LLC